Fast Times at El Camino High

I received a call from Scott Rehn, the Announcer and Event Promoter from Championship Offroad Racing. He's working with El Camino High School in Oceanside, CA, one of two schools selected to be featured in an upcoming episode of Drag Race High on the Speed Channel. It's a reality show, and camera crews record students in auto shop class as each school builds a high performance drag racer from an old muscle car. When the cars are finished, professional NHRA drivers race them down the quarter mile for bragging rights on the national stage.

Scott contacted me because he found this illustration of a 1967 Chevelle SS 396 on my portfolio website.




As luck would have it, El Camino High's car is based off a 1970 Chevelle SS. Scott liked the style of the illustration and asked if I could make a few changes to customize it for the school and the show. Read on...

Though Chevelle enthusiasts may disagree with me, the body styles don't differ much between the '67 and '70 model years, especially when rendered in semi-cartoon style. I did have to change the grille from the older four-headlamp setup to the twin headlamp grille that came later. Also, I changed the orientation of the shaker hood to match the one on El Camino's car. Then we added the school's name in the background and squeezed the giant head of a cougar - the school's mascot - into the driver's side window, sort of Big Daddy Roth style. We also threw in a few other goodies designed to poke fun at their rival school.

Here's what we came up with:



The torn edges came from a page of a very old book that good old Bittbox scanned in and offered up for free on his web site. I converted the scan to greyscale, maxed out the contrast, and used the image as a layer mask. Bada bing, bada boom.

With any luck, some of the kids will be wearing this emblem on their shirts while the crews are filming. What a hoot.

Now back to the drawing board.

Read the full post...

Wacom Rules the Planet. Resistance is Futile.

There's no doubt about it now, my Wacom pen tablet iz tha shiz, y'all. It has sped up my workflow, improved the quality of my line work, expanded my digital painting capabilities, and on more than one occasion made me giggle like a little girl just from the sheer joy of drawing.

Yes, a little girl. I'm secure, I can say it.

Here's the first work I made using this patently perfect peripheral:



If you're considering the purchase of a Wacom tablet, read on...



First, the 6x8 model is the perfect size for the work I do. If you tend to use your elbow as a pivot point when striking a long smooth arc, the next smaller version, the 4x6 model, couldn't possibly be give you enough real estate to pull it off. And the next larger sizes, the 6x11 and the 9x12, seem too bulky to hold comfortably in your lap. Unless you have a lap the size of an Astro Van. Besides, Danidraws.com recommends the 6x8, and that's good enough for me.

The tablet has a total of eight buttons. They're grouped in two clusters of four, one cluster in each upper corner. Of course, they're fully programmable. And, you can specify different functions for each button depending on what application you're running. For example, a button can execute the "b" shortcut (the Brush tool) when you're in Photoshop, and the same button can activate the "p" shortcut (the Pen tool) when you're in Illustrator.

I don't know about you, but that makes me all tingly.




In the left group, I programmed the upper-right button for the "e" shortcut (Eraser tool), and the button below it for the "b" shortcut. That way, I can toggle between the two functions with my left hand while my right hand is busy layin' down the love. (Wait, that didn't sound right, did it?)

Next to each group of buttons is a touch-strip that is also programmable, but is useful only for zooming and scrolling. If you've used a touch pad on a lap-top computer, you'll no doubt have no trouble getting used to the touch-strip.

Finally, Wacom's website also has a great list of tips and tricks for Photoshop, Corel Painter, and Adobe Flash. These guys know how to do support right.

Yes, I'm glowing. This thing is fan-frickin-tabulous.

I'm not ashamed of my feelings.

Now back to the drawing table(t).

Read the full post...

A 1957 Chevy Bel Air and a Better Mouse Trap

I thought I'd have some fun with a 1950's Texaco ad I found on-line while perusing vintage ads for a themed restaurant in North Kansas City.



The poster is 22" x 14" and was painted digitally in Photoshop using brushes I downloaded free from Bittbox.

The entire painting was done using a mouse, which is a process akin to threading a needle with Novocain shots in each finger and wearing boxing gloves. While blindfolded. And drunk.

Things are looking up for the badger, though. I've done my part to help the global economy by making a very wise purchase.

Read on...

I just purchased a Wacom Intuos3 6x8 pen tablet for just a smidgen under $300.00. I plan on writing more about it once the two of us have had more quality time together.

But in the meantime, here are a couple of things I've noticed:

1) Wacom's customer service is stellar. The tablet had a few performance glitches pretty early on, well before I'd finished pinching all the bubble wrap. I was ready to just pack the thing up and send it back - y'know, with the bubble wrap still intact and all, it seemed the easiest solution. Besides, ever since my Microtek scanning software refused to recognize its own scanner and I had a stunningly abysmal experience with Microtek's laughable technical service, I acquired a profanity-laced Tourettes-like tic at the mere thought of contacting any computer peripheral company with questions of any kind. But Wacom suprised me. I emailed their customer support with a description of the problem, and within a day, a friendly gentleman replied with detailed troubleshooting instructions. And when that fix turned out to be only partially effective, a simple email back to customer service brought another helpful reply within 24 hours. I'm still working through the problems (the pressure sensitivity in brush-mode cuts in and out), but I'm pleased that so far, Wacom has made good on their promise to provide prompt technical support.

2) There's a little button in the Wacom control panel called "Lock Proportions." It's located in the Mapping Tab of the tablet setup. Click it on if you want to remain sane. I'm just sayin'. If it's off (which unfortunately is the default setting) the tablet maps its entire surface to your monitor screen. That sounds fine in theory, but if the tablet and screen are not the same proportion, then you'll see an ellipse whenever you try to draw a circle. Talk about a brain-boink. Sure you may lose a bit of usable tablet space, but unless you feel like retraining your visual cortex, I suggest you turn it on.

3) The tablet's drawing surface and the heal of my hand have a relationship to each other similar to Naugahyde against a sweaty butt-cheek. As a result, I tend to get jumpy lines as I drag my hand across the tablet and it sticks. I'm going to try cutting the fingertips off of a cotton glove and wearing it on my drawing hand, Michael Jackson style, so my hand can slide easily across the tablet. I'll let you know if that works.

4) I reprogrammed the front rocker switch on the pen to act as {alt}-{ctrl}-z, which in Photoshop means "Step Backwards" through the undo history. This is slick because my first attempt at drawing a line is seldom my best one. Somewhere around attempt number eight or nine, I either get the line I want or I simply lower my standards a sufficient level to call it good. With this switch setup, marching through each attempt is as easy as draw, click, draw, click...all with one hand.

I'm working on an "ink" drawing with the pen tablet now. Should be done in a week or so, and I'll post the results here. So far, the tablet experience is so superior, it makes using a mouse feel like trying to draw with a crayon taped to your elbow.

Now back to the drawing board.

Read the full post...

Age 26

I found this self-portrait (or "elf-portrait") in a box of old photos. I think I was about 26 at the time, working as an engineer for GM and about ready to be a father.

Yes, this freak was fruitful and multiplied.

Read the full post...

Don't Fight the Graphite

Pencils don't get the respect they deserve. What with the popularity of digital image processing, vectorized line work, and - what's that stuff called? - oh yeah, paint. Sadly, it seems the pencil has been forgotten at the bottom of everyone's Art Bin along with the Pop Tart crumbs and that rock-hard tube of Liquitex Medium Magenta.

But I ask you, who doesn't love the feel of a bright yellow Ticonderoga #2 wood pencil twirling in your fingers or tapping on the edge of your desk? Nobody, that's who.

Read on...

I say the wood pencil deserves to return to its iconic stature, with the makin'-it-happen end sharpened to a long, acicular point, and the pretend-it-didn't-happen end gnawed into an unrecognizable wad of crushed metal and moist rubber. Stick it behind your ear. Chew the paint off it. Hold it flat in your hand, thrust your arm upward, slap your wrist with the other hand, and watch your beloved writing implement rocket skyward until the point embeds itself in your office ceiling. Despite written claims to the contrary, Heaven is a place stocked with an endless supply of sharp wood pencils and thousands of square miles of acoustic ceiling tile.

The pencil is a nearly perfect writing instrument. It's also a darn good drawing tool, as any bored art-kid stuck in High School history class will tell you. It can track a thin line that's so faint, you'll swear one of your arm-hairs fell onto the page. With a firm overhand grip, that same pencil can lay down a heavy pool of slick, black powder that, despite your best efforts, will end up partially smudged on your cheek. And with a skilled hand, it will create smooth, luxurious washes of silvery grey in any shade imaginable.

I've always been comfortable drawing with pencils. I've loved them all my life. Hell, I'm 46 years old and I still have a visible piece of pencil lead imbedded under the skin of my right palm from a John Bonham style drumming mishap in the third grade.

Today I use a Ticonderoga No.2 wood pencil for nearly all my pencil-roughs, layouts, contour drawings, and sketches.

But as much as I love them, I don't use wood pencils for shaded renderings. That's a job for artist's graphite pencils like these. Sometimes called "woodless pencils," these are thick bars of solid graphite with a clear lacquer coating to keep your hands and Chinos clean.

They can be sharpened in any standard pencil sharpener, though I've been told that the preferred method is using a sheet of fine-abrasive sandpaper. They're available in several hardnesses, though typically a 6B will do most everything that I need for shaded sketching.

In pencil parlance, the hardness of the lead is graded by varying levels of "H" for "hard" and "B" for "black" (*). HB stands for "Hard Black" (**) and is equivalent to the classic No. 2 pencil. Softer - and therefore darker rendering - pencils are labeled with increasing values of "B." A 6B lead is much softer than an HB, and 9B is softer still. I find that 6B is amazingly versatile for shaded renderings, able to hold a decent point while still laying down a pretty funky bass-note when asked. I suppose having a super soft 9B on hand would be helpful for deep black areas, but I haven't yet found much need for one yet. Harder pencils can range up to 6H, even harder. A 6H pencil makes a very thin, very light line, and is more comfortable in the hands of a draftsman than a sketch artist. It also doubles as an Exact-o knife.

Now, you'll notice that the art pencils don't have erasers attached to them. That's because artist's are nervous critters by nature, and we'd chew them off before we finished our first layout. So, we buy separate erasers, either of the soft block or kneaded variety. Be warned: these are not interchangeable! The block style, usually made from firm chunks of vinyl, erases using an abrasive action. It literally grinds out the graphite particles from the tooth of your paper. It's useful for removing large areas of goof-ups on bond papers, sketch pads, and Bristol board because these papers absorb (sort of) the graphite dust and need a rather aggressive approach to clean-up. Kind of like my 14-year-old stepson.

Kneaded erasers are more like Silly Putty; they are sticky, and they work by lifting graphite right off the paper. You don't usually rub a kneaded eraser across your work, you dab it right onto the area you want removed. Because they're kind of gooey, you can even mold kneaded erasers into pointed shapes to pick off tiny spots without disturbing the surrounding work.

Because of its hard, dense surface, Vellum is an excellent substrate for the combination of a soft graphite pencil and a kneaded eraser. For final artwork, that set-up is the diggity whoop, yo.

I also use a mechanical pencil. Specifically, I use a Koh-I-Noor 0.7mm drafting pencil loaded with F lead. F is approximately halfway along the pencil hardness scale between HB and H, and I suppose it would be similar to the No. 3 lead in a classic wood pencil, though I can't prove this. I don't know what the F stands for, but let's call it "Fine." The F hardness in a 0.7 mm pencil is very useful for fine detail work, thin contour lines, or anytime I need to draw a hard edge along a metal, cork-back ruler.

Mechanical pencils like the Koh-I-Noor are also available in an absurdly thin 0.3mm variety, and I own one. I just never use it. I do sometimes use the uber-fat 0.9mm version for heavier line work. That bad boy gets H ("Heavy," slightly harder then HB) lead.

One other snazzy gizmo I use often is the eraser shield. It's basically a stainless-steel stencil that masks the work you want to keep while exposing tiny lines, dots, or arcs that you want to attack with your eraser.

Oddly, the majority of the real estate in my graphite drawings is produced using a blending stick, not a pencil. These tightly rolled sticks of paper push the graphite dust around the surface of your page to create those smooth gradients of gray.

Like a pencil, they can be sharpened to a point to help get into tight corners. My process is to lay down a light layer of squiggly lines over a large area with my 6B artist's graphite pencil. Then I spread the love around using the blending stick. If an area looks too dark, I use the kneaded eraser to remove the excess graphite then hit it again with the blending stick. Again, Vellum is my choice for paper here. Because most of the graphite sits on top of the surface of a Vellum sheet, those little dust particles are as easy to push around as an asthmatic preschooler. (Hey, I was an asthmatic preschooler, so I speak from experience.)

After the base layer of gray is down, I can start adding shade and shadow. Again, I lay down a heapin' helpin' of graphite in the darkest areas, then feather it out into the lighter areas using the blending stick. Here, the quarter panel area behind the headlight has been blended out while I'm starting to shade the rocker panel.

The key is to start light, then build to dark. It's tempting to fill in all the heavy shadow areas early so that the image will pop. But you must resist. The danger is that you'll smear all that graphite dust over your drawing as you work on the finer details. Details first, shadows last. Also, never let your bare skin touch the artwork; always rest your hand on a clean sheet of bond paper. Your skin has oils that will smudge and yellow your artwork.

Finally, when I've gather the strength to stop obsessing over impossibly small details and can finally call the drawing finished, I spray the entire sheet with an acrylic fixativ. This locks the loose graphite dust down to the surface to prevent smearing. The good stuff won't yellow or get all crinkly. Some artists use hairspray. Some artists also use drugs. I don't use either.

See? there's no need to fight the graphite. Make it your friend. Speak kindly to it. Go ahead and smear it on your face. It's going to end up there anyway.

Now back to the drawing board.

---

(*) Linguists in the audience will recognize that "black" is not the opposite of "hard." This is because language is a left-brain activity and art is right-brained. It's hard to get the two sides to agree on anything.

(**) I've also heard the "HB" stands for "Heavy Black." This doesn't make sense to me because HB is the hardest black lead you can get.

Read the full post...

DNS is working.

As of this moment, the domain name server is now correctly directing www.theagilebadger.com to my portfolio site rather than to this blog. Emotions are running high here in the badger burrow. Much coffee has been drunk. Colorful language invoked. Success is fleeting, I know, but it seems things are going as hoped, at least for the moment.

From now on, to get to this blog, you can either go to www.theagilebadger.blogspot.com, or just click the "Blog" button on my portfolio site.

I need to figure out how to update my RSS feed to correctly grab Blogger. But that's a whole new bag of snakes.

Back to the drawing board.

Read the full post...

Portfolio Website Up!

All decent, respectable illustrators who operate their business in a professional manner should have a portfolio web site.

So why do I have one, you ask? Good question, smart ass.

Well, justified or not, I have one. And hopefully within a few days, my domain name "theagilebadger.com" will point directly to my portfolio site rather than to this blog. The site will have a "Blog" button that will send all my faithful readers (my mother-in-law, my wife, sometimes the dog) to these pages, which I intend to continue updating on a regular basis. The portfolio site will showcase only my best work, and this blog will concentrate more on describing my process and lessons-learned.

Once the site is fully active, you get to this blog either through the site, or by navigating directly to http://www.theagilebadger.blogspot.com/. You'll figure it out, I'm sure.

For now, you can see a beta version of the new site here. Please let me know, either through email or by commenting in this post, about anything that doesn't look right.

Now, back to the drawing board.

Read the full post...

Good-Guys 7th Midwestern Nationals

What an incredible weekend at the Kansas Speedway! Thousands of hot rods with over-the-top fat tires and gargantuan blowers, hot dogs that cost more for one than an entire six-pack of my favorite beer, and of course, lots of good old fashioned Kansas sunshine.

Check out these beautiful beasts:









You can see all my photos of this event here. Read on...


For those of you whom I met and talked to, thanks for chewing the fat with me and helping me to learn more about these amazing machines. And if you're just stopping by this blog because of the business card I left for you, thanks for checking it out. Much obliged.

One of my most marketable skills is drawing hot rods, either in exaggerated form (like here) or in more realistic portrait styles (like here). Photos are great, but there's nothing like a custom artistic rendering of your one-of-a-kind hot rod. Tee-shirt designs and promotional posters are also in my bag of tricks.

Leave a comment here or drop me an email through the About Me widget. We'll talk. S'all good.

Read the full post...

Faster Than Hell Poster

(Cropped Image)

Just your typical werewolves on motorcycles band promo.

Motorcycles by me, werewolves and poster design by Justin "Killer" Kite. To see the full poster, visit the Killer Kite website.

Read the full post...

Gear Grinder Hot Rod Show

Do what the bad ass poster tells ya. If you don't go, prepare yourself for deep sadness.


Illustration by The Agile Badger; poster design by Killer Kite Productions.

Read the full post...

Bitchin' Camaro! Bitchin' Camaro!

Here's a 1967 Camaro SS that's going into my personal stock images collection for future use. It's modeled after the Deathproof promotional poster. Duh.

Disclaimer: The title of this post in no way condones the behavior depicted in the lyrics of the song "Bitchin' Camaro" by the Dead Milkmen. I do not believe that running over old ladies is a good thing. Really. So chill out already. It's a cool song though.

Read the full post...

I'm a WIENER! No, I mean, WINNER!

Maybe I'm both, actually.

Anyway, I just won a free copy of Swift 3D from the good people (person?) at Bittbox.com! Swift 3D is modeling and animation software that integrates with Adobe Flash, a product that came bundled with my beloved Adobe CS3 along with Photoshop, Illustrator, Dreamweaver, and a wad of other programs that I'm sure includes Tetris and Solitaire somewhere. My imagination is swimming with ideas, and as soon as I've mastered this electronic Lego kit, I'll be able to offer my web clients a world of creative possibilities for their sites.

And that won't be too difficult to achieve, I'd warrant. I spent over a decade performing 3D modeling and analysis of aircraft and automotive components for the likes of GM and Rolls Royce. Now that I have a copy of Swift 3D, I'll be able to relive those wonderful days as an engineer, only this time I'll actually have fun doing it! And the best part is, no more ties, high-water Chinos, hip-pocket calculators, or socially awkward moments with icky girls.

Now, back to the drawing board.

Read the full post...